|
Decorartive Tile
Marble
Murals
Glass
Porcelain & Ceramic
Accessories
|
  |
| |
|
|
|
Preparation for Grout
Mosaic Series
Wait 15-20 minutes (time may vary depending upon environmental
conditions) for the setting material to slightly bond.
Grouting
For grout lines of 1/16" we recommend the use of an un-sanded
grout. When used in conjunction with stone or marble or wherever
grout lines are larger than 1/8", we recommend sanded
grout. To grout glass tiles spread the grout on the surface
using a float, pressing it deep into the joints.
Grout joints will take longer to set up because glass tile
is nonporous and do not absorb liquid. Let set for approximately
20 minutes; then clean with a soft dry cloth or paper towel.
Once the tile is clean, go back over with clean water and
a damp sponge to remove any topical film.
Maintenance and Care
Glass tiles can be routinely cleaned with any non-abrasive
cleaning compound or formula that is recommended for both glass
and tile. Follow manufacturer’s instructions when using
these products.
back to Tile Info |
| |
|
|
  |
